HDMI SWITCH SPLITTER

Introduction

This 4X4 Matrix HDMI SWITCH SPLITTER by cat5e/6 offers unprecedented flexibility and convenience by routing

high definition audio/video from any of four HDMI video sources to any of 4 displays over HDMI cable or 4 remote

displays over inexpensive, standard CAT5e/6 cable. It eliminates the need to disconnect and reconnect sources to

a display equipped with one input. Four receivers work with the Switch Splitter as afull functional module.Full High-Resolution

HDTV signals are supported up to a resolution of 1080p over HDMI cable 15mor at a maximum distance of.40Mover two

pieces of CAT5e/6 cable. The 4X4 Matrix HDMI SWITCH SPLITTER works with HD-DVD players, TiVo systems, HT PCs,

and satellite set-top boxes that connect to an HDMI display. Every source and display is accessible at all times by

selecting it with an IR remote or through RS232 port.

Features

Allow any HDMI display to view any source at anytime

Allow any source to be displayed on multiple displays at the same time

HDMI or DVI to HDMI cables are used to connect the inputs and the matrix output

Each Output includes one HDMI output and UTP output over cat5e/6, but only one way is available at a time.

Each UTP output is connected to a Receiver.

UTP output extends signal up to40mfor 1080p by CAT-6 cable.

Each Input includes an infrared Emitter, which is used to control the long-distance source device by Remote Control.

Each display’s inputs can be switched with the IR remote control or through RS232

Support highest video resolution 1080p.

Support 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.

Support 12bit per channel (36bit all channel) deep color.

Support HDCP

Support uncompressed audio

Support compressed audio

Support 3D all format, including 1080p@23.98/24Hz, 720p@59.94/60Hz/50Hz, bandwidth up to 225MHz.