Extender by TCP/IP with IR/IE

Introduction

The HDMI Extender by TCP/IP with IR/IE is based on TCP/IP standard. It extends your HD display with the resolutions

of 1080p/60Hz up to 330 feet (100 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable.

Meanwhile,this product supports the Command forwarding function of infrared remote control (IR forwarding function).

Through the infrared remote control, you can control your BD player or Set top box (STB) easily. Also, it supports one

to many video and audio transmission function that a sender of this product can support multiple Receivers.

 

Features

M-JPEG encode/decode video up to 1080p.

Support the command forwarding function of infrared remote control (IR forwarding function).

Following TCP/IP standard.

Support resolution up to 480p/720p/1080i/1080p.

Support max video bandwidth to 1.65Gbps/165MHz.

CAT5e/6 cable follows the standard of IEEE-568B.

Support one to many video and audio transmission function that a sender of this product can support multiple Receivers.

Note: Only when Sender and Receiver are directly connected through the LAN Cable , the IR forwarding function can be used.

If sender and Receiver establish data link through a network switch or a router, the IR forwarding function will not be used.

 

Sender:

①DC/5V

Supply power for the Sender

②HDMI In

Connect HDMI Source to this Port.

③TCP/IP

Connect the Sender to the Receiver or Ethernet router or hub by using a Cat5e/6 cable.

④Reset

Use a pin or a pointed object to insert into the hole of reset, press more than  5 seconds, then the MAC and IP of sender can be restored to the factory setting.

⑤IE

 

Receiver:

⑥Reset

Use a pin or a pointed object to insert into the hole of reset, press more than 5 seconds, then the MAC and IP of receiver can be restored to the factory setting.

⑦ TCP/IP

Connect the Receiver to the Sender or Ethernet router or hub by using a Cat5e/6 cable.

⑧ HDMI Out

Connect HDMI sink device to this Port.

⑨DC/5V

Supply power for the Receiver

⑩IR

 

HDMI Extender
Support	the command forwarding function of infrared remote control (IR forwarding function)
Support	resolution up to 480p/720p/1080i/1080p
Support	max video bandwidth to 1.65Gbps/165MHz
Support	one to many video and audio transmission function that a sender of this product can support multiple Receivers