Introduction
This device is an extension cable between USB device and host (computer) with embedded into connector “intelligent”
integrated circuits on both sides of the cable. The USB cable with the chip inside is not a passive extension cable. It is
an active device. The USB signals going in and out of this extension cable in both directions are buffered to assure signal
quality. Unlike passive USB cables the IC prevents signal degradation. The embedded “intelligent” integrated circuit cleans,
amplifies USB signal and watches USB 2.0 protocol. Its Control State Machine enables and disables USB and Cable transmitters
inside the chip depending on USB signals.
Features
Compliant with USB 2.0 specification
Provide support for any high-speed (480 Mb/s) or low-speed (1.5 Mb/s) USB device
Some low power low-speed USB devices can work with cable up 5 meters
Embedded USB 2.0 Transceivers prevents signal loss
Downstream connector: Female, Type “A”, USB Approved Connector;
Upstream connector: Male, Type “A”, USB Approved Connect.
AV/USB Extender | |
---|---|
Support | Compliant with USB 2.0 specification |
Support | for any high-speed (480 Mb/s) or low-speed (1.5 Mb/s) USB device |
Support | Some low power low-speed USB devices work with cable up 5 meters |