HDBaseT 5 Play

Introduction

The Extender is based on the HDBaseT technology. It extends your HD display with the resolution of 1080p/60Hz up

to 330 feet (100 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. It can also extend the

Ethernet, IR, RS232 signals by using the same Cat5e/6 cable at the time. Built-in IR extender function allows IR remote

control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display

back to the Source devices. It also provides POE function that you only need to provide a piece of 48V/1ADC power

adapter at the end of the Sender to supply the power for both the end of the Sender and Receiver.

Features

Support HDCP

Support POE

Support uncompressed HDMI signal.

Enable HDMI 10.2Gbps over a single100mCat5e/6 cable.

Support 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.

Support 1080p@60Hz@48bit pixels.

Support 3D pass-through.

Support CEC pass-through.

Support uncompressed audio

Support compressed audio

Support Ethernet transmission at the time.

Support RS232 signal bypass.

Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending

IR commands received in the vicinity of the Display back to the Source devices.

CAT5e/6 cable follows the standard of IEEE-568B.