Show all

Extend HD AV to 100m

Product model: EMT-CEBSTB001

Categories: ,

Introduction

The Extender is based on the HDBaseT technology. It extends your HD display with the resolutions of

1080p/60Hz up to 330 feet (100 meters) away from your HDMI or DVI-D source using one CAT5e/6 cable.

Built-in IR extender function allows IR remote control of Source devices from remote viewing location by

sending IR commands received in the vicinity of the Display back to the Source devices. It also provides

POE function that you only need to provide a piece of 48V/1ADC power adapter at the end of the Sender

to supply the power both the end of the Sender and Receiver.

 

Features

Support HDCP

Support POE

Support uncompressed HDMI signal.

Enables HDMI 10.2Gbps over a single100mCat5e/6 cable.

Support 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.

Support 1080p@60Hz@48bit pixels

Support 3D pass-through.

Support CEC pass-through.

Support uncompressed audio

Support compressed audio

Built-in IR extender function allows IR remote control of Source devices from remote viewing location by

sending IR commands received in the vicinity of the Display back to the Source devices.

CAT5e/6 cable follows the standard of IEEE-568B.

AV/USB Extender
Support POE
Support 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth
Support 1080p@60Hz@48bit pixels
Support HDMI 10.2Gbps over a single100mCat5e/6 cable